CMT Reflectometers Instrument Driver Readme

To rate this instrument driver, go to the driver download page on the Instrument Driver Network.

1. Overview

Instrument Driver Technology: LabVIEW Plug and Play (project-style)
Manufacturer: CMT
Supported Language(s): LabVIEW
Supported Model(s): R54, R140, R60
Model(s) Tested: R54, R140, R60
Interface(s): ActiveX
Firmware Revision(s) Tested:

Certified: No
NI Supported: No
Source Code Available: Yes

Driver Revision: 17.2.0
Original Release Date: 02/2015
Current Revision Date: 05/2017

2. Required Software

Some software components need to be installed before using this instrument driver. The minimum versions of these components are listed below, and can be downloaded from the Download Site.

LabVIEW 13 or later

Analyser software need to be installed and Analyzer COM server need to be registered during installation process or later using keyword /regserver.
Refer to the LabVIEW Help for more information about software requirements. You access the LabVIEW Help by selecting Help»Search the LabVIEW Help.

3. Known Issues

If you have any questions, please contact support@coppermountaintech.com for further help.
----------------------------------------------------------------------------------------------------

1. Unzip the folder. It should be named CMT Reflectometers. Do not rename.
2. Cut or Copy the CMT Reflectometers folder.
3. Navigate to your LabVIEW folder. It may be found in such a location as: C:\Program Files (x86)\National Instruments\LabVIEW 201x
4. Enter the subfolder \instr.lib
5. Paste the CMT Reflectometers VNA folder here.
6. That is it! You are ready to begin programming!

----------------------------------------------------------------------------------------------------

4. Revision History

The latest version of this and other LabVIEW and LabWindows/CVI instrument drivers can be downloaded at the Instrument Driver Network.

REV 1.1, 09/2015
Original release.

REV 16.1.0, 01/2016
-The driver is upgraded to fix the issue with the ActiveX controller update.
-Additional Vi are added to match the VNA's functionality

REV 17.2.0, 05/2017
-Fixed bug with closing unused references.